Health Safety Environment Interview Questions and Answers Free Download
1. Tips for manuals handling?
- Plan
- Clear the path
- Move in close to the load
- Secure your grip
- Hold your head upright
- Maintain normal curves of the spine
- Power the li with legs and body weight
- Don’t twist
2. Cause of accidents in mechanical handling?
- The sudden failure of wire rope or a chain
- Slipping of the load from the sling
- Swinging of the load at the time of lifting
- The load sometimes hits the man
3. What are the accidents in “poor house keeping”?
- Men getting hit by failing from overhead
- Men slipping as greasy, wet or dirty floor
- Men failing in open tank without cover in level floor
- Accidents due to poor lighting.
- Fire accidents due to faulty electrical wires
4. What are the advantages in good house keeping?
- It helps in the reduction of accidents including fire accidents
- It saves the property damages
- It improves employee moral
- Better productivity
- Working area be-comes presentable
- Human energy is conserved
- Visitors are very much satisfied
- The burden of supervisor is reduced
5. How to care and maintenance of hand tools?
- Tools must be kept clean and free from corrosion
- Keep metal parts lightly oiled
- Remove burrs from edges of tools and heads of chisels.
- Tools which are not in used must be stored separately
- A good worker regularly inspects his tools
- Do not use tools without handles
6. How to prevent accidents of “power tools”?
- The operators should wear face shields or safety glasses
- Power tools should be placed in the store room after use
- power tools should have protected by guards
- Pneumatic hoses or electric cables of power tools should not pass through passage ways.
- The electrical power tools should be properly earthed
- Never horse play with hose of pneumatic tools
- Power tools machines should be maintained and operated properly.
7. What are the causes of accidents of “hard tools”?
- Due to wrong way using of tools.
- Due to defective condition of tools
- Due to failure of using right tools for right job
- Due to wrong way of carrying tools
- Due to strong of tools un safety
8. What precautions are necessary in electrical work?
- All electrical installations shall be as per Indian electricity rules
- Only competent persons should handle the electrical equipments
- The equipments should be earthed properly
- All temporary electric lines should be drawn at least above man’s height
- Cable should be completely insulted
- Cable should not have any joints
- Only connection for one point
- Good house keeping on the area
- Fire protection equipment to be kept near by
- Use rubber gloves and rubber boots
- Use good quality of wire
- Power isolation close to the job
- Use three pin plug instead of loose wire
- Never operate any electrical equipment with wet hands
- Never stand wet surface while working electrical equipments
- During thunder storm do not stand under tree
- Proper sign board is necessary
- No person shall work on any live electrical conductor
- The switch shall only be put on by person who switched it off
9. What are the hazards in construction?
- Fall of person from top and getting injured
- Fall of objects from top and below person injury
- Fall of materials from top and damaged
- Person fall into excavated pit
- Collapse of soil and below person get injury or may
- Damage of UG cables and sewage pipe
- Collapse of scaolding and person fall from height, get injury
- Electrical shock
- Fire and explosion
- Burn injury
- Health and lung problems
- Snakes bite
- Poisonous gas
- Foreign body in eye
10. Cause of accident in construction?
- Erection equipment failure
- Falling of persons from height
- Electrical shocks
- Improper lighting
- Non stop working by worker
- Up safe work methods
- Collapsing of earth during trench excavation
- Failure of use safety equipment
- Working a height without safety belt
